V5 impreza Sti type r vlimited 2.1

Description:

1998 jdm subaru impreza v5 wrx/sti v-limited type r

2004 sti newage conversion}
all looms, ecu's, dash heater, clocksect. front/rear subframes complete with all arms d/shafts hubs brakes, steering rack/column. r180 r/diff uk 6 speed gearbox (later male ended shfts) brembos. intercooler water spray bottle in the boot for winderscreen washers.

engine} 2.1 stroker built by tim farmer, machine work carried out by jon evesham.
all genuine subaru parts used. sourced from top reccomened dealers.
semi closed deck block, machained for .5 oversize and pistons matched 1to 4, refaced block acid cleaned ect
marhl forged pistons +0.5 (92.5mm)
williams stroker i beam forged conrods, arp 2000 rod bolts
v9 2.5 nitrated crossed drilled crank
rcm 11mm oil pump
bee sting baffle sump plate
twinscroll modine, t/s oil pick up t/s sump and t/s w/pump
timimg belt kit
lightened flywheel (5.7kg)
new stage 2 exedy clutch
heads}
jdm spec c big port avcs heads (no cracks) with the better valve train and aggresive high rpm cams. fully stripped acid cleaned and refaced, re shimmed to suit.
supertec valves
supertec bronze/magniesium guilds
supertec stem seals
exhaust valves 3 angle cut
rcm/cosworth headgaskets
arp 11mm head bolts
pfr7 s/plugs
ovs all new genuine rocker gaskets half moons ect.

rcm twinscroll equal headers (mag wrapped) genuine gaskets used
rcm up pipe
tdo5 20g twinscroll turbo
3" to 2.5" t/scroll downpipe into 2.5" straight thro to a hks supper dragger back box
pink injectors ( enterprise 650cc set ready to go in after running in miles have been complete and we can have it fully mapped)
rcm engine breather setup (chassis leg mounted but relocated to windscreen washer location, hence i/c washer bottle in boot for wash wipers.
rcm induction kit into a 1 piece samco turbo inlet with no take offs. ( i had this espically made and strenthend)
mishi moto front mount intercooler
evap delete, fuel tank vent delete, standered oil breather delete, clutch dampning/anti judder removed (now has hell braided hose from master to slave).
walbro in tank fuel pump
xspec 1lt fuel swirl pot with bosch 044 external pump
sytec ajustable fuel regualtor with gauge.
Simtek ecu with motorsport enabled antilag ect
Eboost gauge and controler with 3 port boost solinoid.

body} v5 sti vlimited shell with full v5 and is correctly documented as a coupe 3dr.
full bare body respray
abw arches
v6 3d grill v6 rear spoiler, 22b bonnet vent
full crystal clear kit upfront, sti fog covers, 3piece front splitter
newage (bug/blob) wrx 1 piece side skirts
sti rear lights
evo 7 fq300 rear fog light
18" xxr 527, ( ill get the size of the off set as its a lot bigger to fill the arches, cant remember off the top of my head).18/245/40 new tyres
brembro rear calipers, striped cleaned/refurbed and painted white with blue decals.
Ap racing 6 pot fronts with 2 part discs.
hell braided hoses all round
new grooved/drilled disks/pads all round
kyb coilovers all round with gapp ajustable top mounts
newage mudflaps all round
Super pro 24mm front and rear anti roll bars with super pro drop links
Super pro h brace
Super pro anti lift kit
Defi gauges with comp 2, defi centre holder, oil pressure, oil temp, fuel pressure, water temp.

Car is on a running in map on actuator pressure. I've done 5 oil changes and covered 650 mile. 350 to finish the running in miles. This setup will see 450hp. Engine will be good to 650hp. Bigger injectors turbo ect.