Nissan 350z Turbo Froged 475bhp

Description:

350z with a forged low compression engine, Holset HX40 turbo and various other mods, see below for full list.
475bhp 480ftlbs.
Private reg would be removed before swap.

Will have 12 month MOT from the start of August. Has full service history, serviced every year with the same oil since I've owned it.

Comes on the rays forged lightweight wheels, i also have a set of rx7 wheels with big r888r tyres that fit on the back, these can be included.

Only fault is sometimes at car parking speeds, the steering column UJ touches the starter motor. This either needs the mount modifying or a multi fit/adjustable aftermarket starter fitting, it's fine while driving.

Not 100% on what i want to swap for, ideally rwd, either something completely different or something like a 200sx/r33 skyline, don't mind if it needs a bit of work but ideally don't want to have to fix rust.


Engine Mods:

[  ] Engine rebuild, all gaskets/seals replaced, new sump and various other bits replaced.
[  ] Block machined for oversized 8.8:1 wiseco pistons, rings gapped for high boost. Rotating assembly balanced.
[  ] Eagle H beam con rods.
[  ] Heads and block skimmed/cleaned and modified to fit HR head gaskets and Juke head bolts.
[  ] Cosworth bearings with larger clearances.
[  ] New timing chain kit, water pump, rev Up oil pump.
[  ] New turbo, Holset HX40
[  ] Custom, straight through Exhaust, no cats, GFB EX44 external wastegate.
[  ] Link G4X ECU
[  ] DW 1050cc injectors
[  ] Fuel return system from Horsham Developments with a walbro 255 pump and adjustable fuel pressure regulator.
[  ] 1 step colder spark plugs
[  ] Aftermarket intercooler
[  ] Map sensor/iat sensor fitted instead of a MAF.
[  ] Aftermarket Oil cooler
[  ] AAM Oil pan spacer
[  ] Mishimoto lower temp thermostat
[  ] Japspeed dual core aluminium radiator.
[  ] Stage 3 competition clutch, harder and noisier than a standard clutch but still usable.
[  ] Lightweight Flywheel
[  ] Electronic boost control done using the ecu, solenoid and wategate.
[  ] Fluidampr Crank pulley
[  ] Oil temp sensor/gauge
[  ] AEM wideband sensor/gauge
[  ] Boost gauge
[  ] Pillar pod
[  ] GKtech Diff brace
[  ] Silicone coolant hoses
[  ] Funk motorsport turbo blanket.
[  ] Mishimoto radiator fan shroud with replacement spal fans fitted.
[  ] Custom aluminium under tray.

Exterior/interior mods:
[  ] Carbon fiber intake on genuine nismo front bumper.
[  ] Evo bonnet vent.
[  ] Side skirts
[  ] Rear diffuser.
[  ] Rear spoiler.
[  ] Rear window louvres - held on with 3m dual lock velcro so easy to remove for cleaning.
[  ] Modified headlamps with drl's and Bluetooth controlled angel eyes.
[  ] Carbon skinned interior trim.
[  ] Android auto head unit.